The Role Of NSK Bearing Lubricant

wallpapers Environment 2021-01-21

NSK bearings, NSK's main products are bearings, NSK Bearing Company, due to excellent quality and considerate service, NSK company's business is also progressing rapidly. NSK uses a well-structured intelligence network to combine the four regions of Japan, Europe, America, and Asia-Pacific into a four-pole system. Due to China's pivotal position, the development of NSK's business in China will further improve the four-pole system.

 

NSK bearing maintenance

 

Keep the NSK bearing lubricated and clean. Before inspecting the NSK bearing, the surface of the NSK bearing should be cleaned, and then the parts around the NSK bearing should be removed. It must be noted here that the oil seal is a very fragile part, so do not apply excessive force to the NSK bearing during inspection and disassembly to avoid damage to the parts. If the oil seal of the NSK bearing and its surrounding parts show bad symptoms when inspecting it, be sure to replace it, so as not to cause a bad oil seal to cause damage to the NSK bearing.

 

The quality of lubricants for NSK bearings

 

In many later stages, it was found that the life of NSK bearings was too short. It was discovered that in addition to other factors, the quality of the lubricant was also directly affected. The inspection method for NSK bearing lubricants is: apply a little bit of lubricant and rub between the two fingers. If there are contaminants, it can be felt; or apply a thin layer of lubricant on the back of the hand, and then perform a light-sealing inspection . Then it is time to replace the lubricant of NSK bearings. Note: The oil should be filtered before use. When replacing the grease with grease-lubricated NSK bearings, the cleaver should not be attached with cotton to any part of the NSK bearing. Because these residual fibers may be wedged between the rolling elements and cause damage, especially the application of small bearings should pay more attention to this problem.


Tag: